HEALTH CHECKS, AUDITS AND LEAK DETECTION
Our engineer makes a free visual inspection of your entire compressed air, nitrogen or oxygen system, from air compressor/gas generator to point of use, all of the ancillary equipment along the line and even the compressor/plant room environment. Equipment is checked for condition, appropriate capacity, ISO compliance, unproductive running and for air leaks, to name but a few areas.
After we have checked your system, you will receive a no-obligation written report, outlining where running efficiency improvements or energy savings could be made, and highlighting any non-conformance with ISO standards or wasteful practices.
Upon checking your visual inspection report, our engineer may recommend a free energy assessment and recommendations through data logging (iiTrax), which we recommend for compressed air installations above 11kW. This will tell you the actual running hours and calculated air usage of your air compressors. This will help calculate a realistic energy savings potential, make simulations and provide recommendations to achieve optimal energy efficiency. The data logger is non-intrusive and will monitor performance typically over a 7-day period.
If needed, a full AIRScan will be quoted. This will cover flow testing, air leak detection, air quality testing, measurement and analysis of pressure and dew point throughout your whole system from compressor room to production processes. This will show you the most suitable method for your company to reduce energy costs and CO2 emissions.
